caltide.ai

How to Calculate Calories in a Recipe, per Serving and per 100 g

To calculate calories in a recipe, weigh every raw ingredient, look up the calories, protein, carbs and fat for each weight, and add them up. Divide the totals by the number of servings to get calories per serving. If you want a figure per 100 g, weigh the finished dish and divide by that cooked weight instead.

Jay HoldenPublished · 7 min read
Raw chili ingredients on kitchen scales next to a cooked pot of chili on a scale and four equal bowls
The short answerThree steps for any homemade dish
  1. Weigh it raw. Weigh each ingredient before it is cooked, oil and sauces included.
  2. Add it up. Total the calories, protein, carbs and fat for the whole pot.
  3. Divide. Divide by servings for a portion, or by the cooked weight in grams and multiply by 100 for a per 100 g figure.

How to calculate calories in a recipe, step by step

The method works for soups, curries, bakes and salads alike. You need a kitchen scale and a trustworthy source of nutrition data, such as the packet labels or a food database like USDA FoodData Central.

  1. List every ingredient, even the splash of oil in the pan and the spoon of honey in the dressing.
  2. Weigh each one raw, in grams, before it goes into the pan. Raw weights match the raw values on labels and in databases.
  3. Find the values per 100 g for each ingredient, then scale them: grams used divided by 100, times the value per 100 g.
  4. Add the rows together to get the calories, protein, carbs and fat for the whole recipe.
  5. Divide by servings if you split the dish into equal portions.
  6. Weigh the cooked dish if you want calories per 100 g or plan to eat portions of different sizes.

You can check single ingredients in the calories in everyday foods pages, which list calories per 100 g or ml with protein, carbs and fat.

Worked example: how many calories are in a pot of chili?

Here is a beef and bean chili for four. The values are typical figures for raw ingredients; your packets may differ a little, so use your own labels when you cook it.

Ingredient (raw)WeightkcalProteinCarbsFat
Lean beef mince, 5% fat500 g685107 g0 g25 g
Kidney beans, canned, drained480 g48033 g72 g2.4 g
Chopped tomatoes, canned800 g1608 g28 g1.6 g
Olive oil15 g1330 g0 g15 g
Onion150 g601.7 g14 g0.2 g
Red pepper150 g461.5 g9 g0.5 g
Chili spice mix10 g301 g5 g1 g
Whole pot2,105 g1,594152 g128 g46 g

Calories per serving of chili

Split the whole pot into four equal bowls and each one gets a quarter of everything.

Chili, per serving (4 servings)

Whole pot1,594 kcal
Divided by servings÷ 4
Macros per serving38 g P · 32 g C · 11.5 g F
Calories per servingabout 399 kcal

This holds whether the chili simmered for 20 minutes or two hours, as long as the whole pot is shared out.

Calories per 100 g of cooked chili

After an hour of simmering with the lid off, the pot weighed 1,700 g of chili, down from 2,105 g of raw ingredients. About 400 g of water left as steam. The calories did not go anywhere, so they are now spread over less food.

Chili, per 100 g

Raw mix: 1,594 kcal ÷ 2,105 g × 10076 kcal
Cooked: 1,594 kcal ÷ 1,700 g × 10094 kcal
A 350 g bowl of cooked chiliabout 328 kcal

Using the raw figure for that bowl would give 265 kcal, an undercount of about 63 kcal.

To weigh the cooked dish, weigh the empty pot before you start, then weigh the full pot at the end and subtract the pot.

Why does cooking change calories per 100 g?

Cooking drives off water. Simmering, roasting and baking all let steam escape, and water has no calories. The energy stays in the pot while the weight drops, so every 100 g of the finished dish holds more calories than 100 g of the raw mix.

The opposite happens when food soaks up water. Rice, pasta, oats and lentils gain weight as they cook, so their calories per 100 g fall. That is why per 100 g figures only make sense when you know whether they refer to raw or cooked food.

Calories per serving do not change either way. Four equal bowls from one pot are still a quarter of the pot each, whatever the water did. Per 100 g matters when portions are not equal or when you weigh what goes on your plate.

What are the most common recipe calorie mistakes?

Guessing the cooking oil

Oil is the easiest place to lose track. A tablespoon of olive oil weighs roughly 13 to 15 g and carries about 120 to 135 kcal, and a free pour is often two or three of those. Put the bottle on the scale before and after you pour, and log the difference. In the chili above, the oil is 8% of the calories from less than 1% of the weight.

Using cooked weights for raw entries

Database entries and labels are for one specific state, usually raw or dry. If you weigh 300 g of cooked rice and log it as 300 g of raw rice, you count the water as rice and end up with nearly three times the real calories. Meat goes the other way: it loses water as it cooks, so cooked weight logged as raw undercounts. Weigh raw, or pick an entry that clearly says cooked.

Forgetting sauces, dressings and toppings

A spoon of pesto, a knob of butter stirred in at the end, grated cheese, sour cream on top: these finish the dish and are easy to leave off the list. Add anything that goes into the pot as an ingredient. Toppings that only some people add are better logged on their own.

How do I work out the macros of a homemade recipe?

Macros follow exactly the same maths as calories. Scale each ingredient's protein, carbs and fat by its weight, add the columns, then divide by servings or by the cooked weight. Cooking does not create or destroy protein, carbs or fat, so the totals stay put while the weight changes.

Once you have the figures per serving, you can compare them with your daily targets from the macro calculator.

Recipe macros calculator: how Caltide recipes do the maths

Caltide recipes run the same steps for you, so you only do the weighing.

  • Add ingredients from the food catalogue with an amount in grams, millilitres, ounces, fluid ounces or servings. The calories and macros for each row are scaled from the food's own values.
  • Set the servings, from 1 to 50. Caltide divides the totals into calories, protein, carbs and fat per serving.
  • Add the cooked weight if you weighed the finished dish. It is optional. When you enter it, Caltide uses it for the per 100 g figures and the serving size; when you leave it out, it uses the summed ingredient weights. Per serving calories stay the same either way, just like in the chili example.

Log a serving or a weighed portion

When you eat, log the recipe in servings, including fractions down to a quarter of a serving. If you weigh your bowl instead, pick grams in the unit picker and enter the weight; Caltide counts it from the per 100 g figure. Logging by weight works for recipes built from weighable ingredients. A recipe made only of items counted in servings has no grams to log, so you log it in servings.

Is it a free recipe calorie calculator?

Yes. Building, editing and logging your own recipes is part of the free plan, because writing down what you cooked is never behind the paywall. You need an account to save recipes.

Importing a recipe from a web page link or a photo is a Pro feature. Caltide turns the link or photo into a draft on the recipe form, and you check the ingredients and save it yourself. See plans and pricing for what Pro includes.

Let Caltide do the recipe maths

Add your ingredients, set the servings and the cooked weight, and log a serving or a weighed bowl with calories and macros worked out for you.

Start tracking for free

Setup takes about 30 seconds.

Frequently asked questions

Weigh them raw. Labels and most database entries give values for raw or dry food, so raw weights match them. Then weigh the finished dish once if you want a per 100 g figure.

Weigh the cooked dish, divide the total calories by its weight and multiply by 100 to get calories per 100 g. Then weigh your own portion and scale: a 350 g bowl of a dish with 94 kcal per 100 g is about 328 kcal.

Cooking drives off water, which has no calories. The same calories end up in less weight, so each 100 g holds more. Foods that absorb water as they cook, such as rice and pasta, go the other way.

Weigh the bottle before and after you pour and add the difference to the recipe as an ingredient. For shallow frying, counting all the oil you poured is the safe estimate, since you can't easily measure how much stays behind in the pan.

Scale each ingredient's protein, carbs and fat by the grams you used, add up each column, then divide by servings or by the cooked weight. The FDA guide to the Nutrition Facts label explains how to read the values on packets.